Advantages
For Plastics,metal,wood,rubber,paper,leather.And other equirements.Fast curing speed, 1 to 3 seconds for the first time curing, 15 seconds all curing, the viscosity, high strength, high strength of the adhesive is suitable for various purposes.

 

Features
No smell, no bleaching, fast curing, high strength, high transparency, viscosity.

TIP:
The relationship between curing speed and substrate

The curing rate depends on the substrate to be adhered, and the table below shows the settling time of the different substrates at 22 ° C / 50% relative temperature. The following test is the time required for the shear strength of the sample to reach 0.1 N / mm2 (14.5 psi) according to ASTM D1002.

 The relationship between curing speed and clearance

The cure rate depends on the bond gap. Adhesive gap Small curing speed, increased adhesion gap will reduce the curing speed.

 The relationship between curing speed and accelerator

Adhesive gap is too large, so that curing is too slow, the use of accelerator on the substrate surface can improve the curing speed. However, the treatment of some of the accelerators will reduce the final strength of the bond. It is therefore recommended to test to determine the actual achievable performance. It is recommended to use the ZDS 3755 accelerator bonding strength is not affected.