Quick-drying AB Glue Epoxy Resin for Metal Glass Ceramic Wood Stone
Model: TS2111
Model: TS2111
Introduction
TS2111 is a fast curing two-component epoxy adhesive, which is easy to operate, can
achieve rapid curing at room temperature. It has high strength, good toughness after
curing. It can well bond to PC, PP, wood, metal, ceramics, glass plastic and other commonly used
materials.
Features and Advantages
1. 5 minutes' fast dry
2. High mechanical properties, strong cohesion, dense chemical structure ;
3. Small shrinkage of curing volume, small linear expansion coefficient
4. Good stability, no deterioration;
5. Good process,easy to use, can be simultaneously extrude the mix to use;
6. No low molecular release
7. Curing fast at room temperature, can improve production efficiency;
8. Good toughness, good adhesion
9. Non-corrosive, no damage to the substrate
Technical Parameters
Feature before curing:
The physical properties and electrical insulation after curing:
Application:
1. metal, ceramics, glass, plastic,PP,PC,wood
2. LED light, LED strips,special used for bonding LED ball-type lamp
3. PCB circuit board
4. Electronic transformor
5. Hogh Voltage Package
6. Power Template
7. Electronic components
8. Household applicances
9. Automative and so on
Packaged:
1. Static mixing tube: 50ml / syringe
2. Customized
Pics:
FAQ
Q1: What's the thermal conductivity test method given on the data sheet?
A1: Tested the thermal conductivity by the third party"ASTM".
Q2: How to find a right thermal conductivity for our application?
A2: Depends on the watts of power source, ability of heat dissipation.
Q3: What other products you have?
A3: Thermal crease, thermal glue, bonding glue, LED silicone, RTV glue, silicone potting, thermal pad, SMT red glue, dispenser and ect.
Q4: Do you accept custom orders?
A4: Yes, sure. Welcome to custom orders. Our custom elements including dimension,shape,color and coated one side or two sides adhesive or coated fiberglass. If you want to place a custom order, pls kindly offer a drawing or leave your custom order info.
Q5: Do you offer free samples?
A5: Yes, we are willing to offer free samples but pls kindly note that your side pay for freight.
Q6: How to ship our orders?
A6: We will help to arrange transportation for you. But if you want to use your own courier pls kindly tell us before shipping out.
Q7: What's the leading time?
A7: 1-3 working days for Sample orders,3-5 working days for mass production.
Features and Advantages
1. 5 minutes' fast dry
2. High mechanical properties, strong cohesion, dense chemical structure ;
3. Small shrinkage of curing volume, small linear expansion coefficient
4. Good stability, no deterioration;
5. Good process,easy to use, can be simultaneously extrude the mix to use;
6. No low molecular release
7. Curing fast at room temperature, can improve production efficiency;
8. Good toughness, good adhesion
9. Non-corrosive, no damage to the substrate
Technical Parameters
Feature before curing:
| Item | Index | |
| TS2111 | TS2111 | |
| Exterior | Colorless to pale yellow transparent viscous liquid | Light (brown) yellow transparent viscous liquid |
| Solid Content% | 100 | 100 |
| Flash Point(ºC) | >100 | >100 |
| Viscosity(25)mPa.s | 10000~20000 | 10000~20000 |
| Proportion (25ºC)g/cm3 | 1.16±0.02 | 1.03±0.02 |
| Ratio (weight or volume ratio) | A:B=1:1 | |
| Positioning time(min) | 30~40(25ºC) | |
| Items | Index |
| Exterior | Light yellow transparent material |
| Proportion(25ºC)g/cm3 | 1.11±0.02 |
| Thermal expansion coefficient /ºC | 65×10-6 |
| Glass transition temperature ºC | 75 |
| Hardness(Shore D) | 80 |
| Adhesion Strength (Mpa) | 10.5 |
| Temperature Resistance ºC | - 40 ~100 |
| Dielectric Constant(25ºC, 1KHz) | 4.3 |
| Volume Resistance Ω-cm | 3.5×1013 |
| Surface Resistance Ω-cm | 3×1014 |
| Dielectric loss(25ºC, 1KHz) | 0.015 |
| Dielectric Strength (25ºC)kV/mm | 15 |
Application:
1. metal, ceramics, glass, plastic,PP,PC,wood
2. LED light, LED strips,special used for bonding LED ball-type lamp
3. PCB circuit board
4. Electronic transformor
5. Hogh Voltage Package
6. Power Template
7. Electronic components
8. Household applicances
9. Automative and so on
Packaged:
1. Static mixing tube: 50ml / syringe
2. Customized
Pics:
FAQ
Q1: What's the thermal conductivity test method given on the data sheet?
A1: Tested the thermal conductivity by the third party"ASTM".
Q2: How to find a right thermal conductivity for our application?
A2: Depends on the watts of power source, ability of heat dissipation.
Q3: What other products you have?
A3: Thermal crease, thermal glue, bonding glue, LED silicone, RTV glue, silicone potting, thermal pad, SMT red glue, dispenser and ect.
Q4: Do you accept custom orders?
A4: Yes, sure. Welcome to custom orders. Our custom elements including dimension,shape,color and coated one side or two sides adhesive or coated fiberglass. If you want to place a custom order, pls kindly offer a drawing or leave your custom order info.
Q5: Do you offer free samples?
A5: Yes, we are willing to offer free samples but pls kindly note that your side pay for freight.
Q6: How to ship our orders?
A6: We will help to arrange transportation for you. But if you want to use your own courier pls kindly tell us before shipping out.
Q7: What's the leading time?
A7: 1-3 working days for Sample orders,3-5 working days for mass production.